Навесное оборудование Мини-погрузчики Экскаваторы Обслуживающая техника Телескопические погрузчики Запчасти

Техника Навесное оборудование

3-Point Hitch Adaptor Attachment

3-Point Hitch Adaptor Attachment

Use this adaptor with Category I and II implements. Features include exclusive Bob-Tach for quick-mounting, adjustable top link for added versatility and 2-inch receiver for towing trailers.
Angle Broom Attachment

Angle Broom Attachment

Sweep a clean path economically. The hydraulically-driven angle broom quickly and efficiently sweeps away dirt, dried mud, light snow, and other debris. Use it to sweep driveways, sidewalks, parking lots, loading docks, warehouses and more.
Auger Attachment

Auger Attachment

Dig holes with speed and plumb-line accuracy. The heavy-duty hydraulic auger bites in with high torque power. The entire drive unit follows the bit into the hole, adding a foot more dig depth than a standard unit.
Backhoe Attachment

Backhoe Attachment

Turn your Bobcat? loader into a powerful excavator with a full line of backhoe models for all sizes of Bobcat Loaders.
Bale Fork

Bale Fork

The pair of small diameter forks offers benefits over a single fork. They stabilize the load by balancing round bales and securing uneven bales. Mounts quickly on Bobcat standard or heavy-duty pallet fork attachment frame.
Bale Handler Attachment

Bale Handler Attachment

The bale handler attachment was designed for the agricultural market. Coupled with the VersaHandler? telescopic tool carrier (TTC), the bale handler efficiently transports bales from the ground onto a trailer.
Bale Squeeze Attachment

Bale Squeeze Attachment

Move large square bales or stacks of smaller bales with the bale squeeze. It has the ability to move bales of different sizes and transport them from site to site or can load them on to a trailer. The hydraulic left arm retracts to firmly grab bales.
Bob-Tach Backhoe Attachment

Bob-Tach Backhoe Attachment

What makes the Bob-TachTM backhoe unique is its ability to swing the dipper left or right 48 degrees. That means the operator doesn't have to skid the loader to dump the spoil, as necessary with some low-cost mini-hoe attachments.
Boring Unit Attachment

Boring Unit Attachment

Save the time and expense of tearing up sidewalks, driveways and other paved areas to install irrigation lines or power and communication cables. The hydraulically powered attachment bores horizontally to accommodate pipe or cable up to 4 inches in diameter. After boring, it can pull the pipe or cable through the hole.
Box Blade Attachment

Box Blade Attachment

The Bobcat box blade is available in two models: the 84-inch box blade and the 84-inch laser box blade. The laser box blade comes standard with a fully integrated laser control system.
Box Scraper Attachment

Box Scraper Attachment

Mount this unit on you ToolcatTM utility work machine to save time backfilling holes and trenches and scraping and leveling roads, yards and ball fields. With dual cutting edges, it works in either direction.
Brush Saw

Brush Saw

The Bobcat? brush saw attachment is the quick, convenient way to remove unwanted brush and small trees up to 15 feet tall. It's ideal for cutting firebreaks, clearing pastures and grasslands, and cleaning road and utility line right-of-ways.
Brushcat Rotary Cutter Attachment

Brushcat Rotary Cutter Attachment

Handle your tough brush-clearing applications easily with the BrushcatTM rotary cutter. It mulches small branches and saplings - up to 3 inches in diameter - and cuts through the thickest grass and brush. Its powerful blades provide an excellent cutting and mulching action while maintaining the proper power-to-blade ratio.
Chipper Attachment

Chipper Attachment

The Bobcat? chipper attachment grinds branches, trees, limbs, saplings, and other debris quickly, safely and easily and reduces the branch volume 10-to-1.
Clamp Attachment

Clamp Attachment

Put this handy hydraulic attachment to work with a trenching bucket or three-tine grapple and easily move odd-shaped objects such as tree stumps and broken concrete.
Concrete Mixer Attachment

Concrete Mixer Attachment

Turn your Bobcat loader into an efficient concrete mixer with this rugged, cost-effective attachment. The Bobcat concrete mixer attachment lets you mix, transport and dump concrete much more quickly than a traditional stand-alone mixer and wheelbarrow.
Concrete Pump Attachment

Concrete Pump Attachment

Just attach your Bobcat loader to either side of the concrete pump and position the unit where you need it. Then connect the hoses, feed the concrete mix into the hopper and pump. There's no more need for mud buggies, loaders with buckets, wheelbarrows, shovels or chutes.
Curb Planer Attachment

Curb Planer Attachment

Here's the smart way to mill down slipformed concrete curbs. It creates a smooth approach from the street into driveways. Hydraulic side-shift eliminates straddling the curb and gutter when milling by allowing the loaders to stay in the street.
Digger Attachment

Digger Attachment

The Bobcat digger attachment not only digs in both forward and reverse, it also has an astonishing multitude of uses - all aimed at significantly increasing your jobsite capabilities, productivity and profits!
Dozer Blade Attachment

Dozer Blade Attachment

Turn your loader into a mini crawler with a Bobcat Dozer Blade. A Bobcat loader combined with a Bobcat dozer blade attachment will easily compete with smaller crawler dozers in loose material; accomplishing jobs that would otherwise require dedicated equipment.
Drop Hammer Attachment

Drop Hammer Attachment

Break it up with the Bobcat Drop Hammer Attachment! The Bobcat drop hammer efficiently demolishes concrete and asphalt up to 18 inches thick.
Dumping Hopper

Dumping Hopper

The dumping hopper attachment can be parked and loaded with debris, and is also ideal for transporting sand, gravel, cement, topsoil and other bulk materials around any jobsite. Use the dumping hopper where trucks can't go, like backyards or buildings!
Flail Cutter Attachment

Flail Cutter Attachment

The Bobcat? flail cutter is the ideal attachment for clearing brush and small trees up to three inches in diameter while distributing the cut material evenly.
Forestry Cutter Attachment

Forestry Cutter Attachment

Take trees and underbrush from unsightly overgrowth to mulch in minutes with the Bobcat? forestry cutter. The forestry cutter leaves a carpet of mulch behind when clearing trees and brush for pre/post disaster mitigation, utility line and road right-of-way maintenance, site preparation, orchard and vineyard maintenance.
Grader Attachment

Grader Attachment

Turn your Bobcat loader into a high-performance grading machine. The grader was designed for use by landscaping, asphalt, curb and gutter and concrete flatwork contractors.
High-Flow Planer Attachment

High-Flow Planer Attachment

The Bobcat high-flow planer provides additional versatility with more features, independent controls, and more production, utilizing the high-flow hydraulic systems of Bobcat loaders.
Hydra-Tilt Attachment

Hydra-Tilt Attachment

The Hydra-TiltTM attachment uses a wrist-like action to move excavator buckets to either side. Save time and improve productivity on countless jobs by simply tilting the bucket left or right, instead of moving the entire machine.
Hydraulic Breaker Attachment

Hydraulic Breaker Attachment

The new Bobcat HB-series breakers have been designed to meet the most demanding customer requirements. They are the first breakers designed for Bobcat compact equipment carriers to maximize efficiencies by matching hydraulic capacity of the carrier to the breaker allowing consistent machine to breaker performance.
Landplane - Basic and Deluxe

Landplane - Basic and Deluxe

Turn your skid-steer loader into a powerful land-planing tool with the Bobcat? landplane attachment. A wide 79-inch-by-51.5-inch planing surface makes it easy to break up hard ground, eliminate soil clods, move materials around your work site, sift soil to remove large rocks and more.
Landscape Rake Attachment

Landscape Rake Attachment

The Bobcat landscape rake is the perfect finishing tool. It rakes and collects surface debris while smoothing and leveling the soil. It picks up 3/4-inch and larger rocks as well as most 1/2-inch rocks. Operators can use the attachment's adjustable side skis to control depth.
Laser Equipment

Laser Equipment

The Bobcat? automatic laser system can now save money on materials, time, and labor. Just one operator can eliminate the use of grade rods and transits or lasers to continually check grading progress, and do the work of an entire survey crew.
Mower

Mower

The Bobcat? mower attachment is recommended for rough-cut applications, including road ditch right-of-way, golf course roughs and large acreage mowing. It's ideal for landscape contractors, nurseries, golf courses, municipalities, hobby farmers, large-lot and rural homeowners.
Packer Wheel Attachment

Packer Wheel Attachment

The packer wheel adds versatility to a machine by reducing the need for conventional compaction equipment and promoting on-the-job safety by eliminating the need for a person working in the trench. It comes in an 11-inch width and no auxiliary hydraulics is required.
Pallet Fork Attachment

Pallet Fork Attachment

Move bulky, bagged or palletized material quickly and easily with the pallet fork attachment. It works well for industrial plants and landscaping to handle baled or pallet materials.
Plate Compactor Attachment

Plate Compactor Attachment

The plate compactor reduces the need for a person in the trench as required when using a hand-operated compactor. The attachment provides better compaction, better operator comforts and enables operators compact hard to reach areas like trenches and slopes.
Power Tilt Attachment

Power Tilt Attachment

The Power Tilt attachment uses a wrist-like action to move excavator buckets to either side. Save time and improve productivity on countless jobs by simply tilting the bucket instead of moving the entire machine.
Ripper Attachment

Ripper Attachment

The frost and rock ripper, developed for Bobcat backhoes and excavators, is used to penetrate and scarify frost or hard ground. Once the ground is loosened, the ripper can be easily removed and replaced by a bucket to finish cleaning the hole.
Scarifier Attachment

Scarifier Attachment

Rip asphalt for removal or break up tough, hard-packed soil for digging or landscaping. This front scarifier features one- to seven-tooth versatility, adjustable depth skids for presetting digging depth as deep as 6 inches.
Scraper Attachment

Scraper Attachment

The Bobcat? scraper is an excellent tool to remove stubborn, packed-on materials such as mud, snow and ice from driveways, sidewalks, parking lots, bike paths - anywhere buildup could occur. Slide this attachment along the ground and the packed areas will break up with ease to leave a smooth surface for walking or driving.
Seeder Attachment

Seeder Attachment

The Bobcat? seeder attachment gives you accurate seed placement and adjustable metering. Unlike broadcast seeders, the Bobcat seeder places the seed with the proper spacing and at precisely the right depth for better germination.
Silt Fence Installer

Silt Fence Installer

Increase your productivity by installing thousands of feet of silt fence fabric per hour and avoid costly governmental fines and project shutdowns. It's the fastest, easiest and most economical way to install silt fence for residential, commercial, industrial or highway projects.
Snow Blade Attachment

Snow Blade Attachment

A double-action cylinder angles the blade 30 degrees to the left or right. Angling the blade is controlled from the cab by a fingertip control, which allows the operator to adjust the blade without removing hands from the loader steering levers.
Snow Pusher Attachment

Snow Pusher Attachment

Use the Bobcat snow pusher attachment to clear parking lots, driveways and building sites with speed and efficiency. The snow pusher is available in 8-foot and 10-foot widths to match your job and loader.
Snow V-Blade Attachment

Snow V-Blade Attachment

Fingertip controls make it easy to configure this hydraulically operated blade on the go to match your job. Angle the blade 30 degrees right or left if you want to continually push snow to either side. To push large amounts of snow, choose the straight or scoop configuration. Or select the v-configuration to plow through the deepest snow.
Snowblower Attachment

Snowblower Attachment

The Bobcat snowblower is the perfect winter clean-up tool. Blow snow off driveways, sidewalks or in those tight quarters where only a Bobcat loader can fit. These rugged rotary snowblowers feature direct-drive hydraulic motors to reduce maintenance costs, and a chain and sprocket system for rotating the chute that eliminates tangled and frozen cables.
Sod Layer Attachment

Sod Layer Attachment

Whether laying sod is a normal part of your day-to-day operation or just an occasional chore, the Bobcat? sod layer attachment can make the job go more quickly and efficiently.
Soil Conditioner Attachment

Soil Conditioner Attachment

Choose one of the eight soil conditioners Bobcat Company has to offer to help smooth ruts, move material or level mounds quicker and with less labor than ever before. The Bobcat soil conditioner attachment is a versatile, cost-effective tool no landscaping crew should be without.
Soil Cultivator Attachment

Soil Cultivator Attachment

Cultivating out weeds along shelter belts and orchards are just two ways to save time and labor with this attachment. It's also ideal for preparing shallow seedbeds such as food plots for wildlife, large garden plots and landscaping.
Sprayer Attachment

Sprayer Attachment

Famous Bobcat toughness and dependability are built into this rugged attachment. The Bobcat sprayer is manufactured to fit the versatile ToolcatTM utility work machine and Bobcat utility vehicles.
Spreader Attachment

Spreader Attachment

Make your spreading jobs easier with the Bobcat? spreader attachment. Load the 5.75 cubic foot hopper from the back of a dump truck, and spread virtually any dry, free-flowing granular material quickly and easily.
Standard Planer Attachment

Standard Planer Attachment

An economy model designed to work well on specified Bobcat loaders. The standard-flow planer is a perfect attachment for municipalities and road repair crews doing minor repairs to parking lots, driveways and roadways.
Steel Tracks

Steel Tracks

Loaders with tracks allow for better flotation and reduced ground pressure when compared to rubber tired skid-steer loaders - this means you can get back on the jobsite sooner and stay on it longer in wet conditions.
Stump Grinder Attachment

Stump Grinder Attachment

Take the work out of stump removal with this powerful attachment. With a 36-inch width, the model SG30 fits easily in limited access areas. The model SG60 has a 32-inch cutting height and 58-inch reach, allowing you to grind an entire stump without repositioning.
Surface Planer Attachment

Surface Planer Attachment

Designed to produce very fine surface finishes. The Bobcat surface planer attachment removes lines, paint stripes and thermoplastics from parking lots, highways, streets and airports. New paint or thermoplastics can be poured into the recessed areas after planing, leaving stripes and lines untouched by snowplows.
Sweeper Attachment

Sweeper Attachment

Now you can sweep, collect and dump dirt and other debris with just one attachment. Ideal for construction, industrial or municipal jobs, the Bobcat? sweeper is easy to attach and simple to operate going either forward or reverse.
Tiller Attachment

Tiller Attachment

Use this landscaping attachment to save time and labor when breaking up ground and mixing compost and other materials into the soil. You can even till next to sidewalks, curbs and buildings thanks to offset mounting.
Tilt Carriage Attachment

Tilt Carriage Attachment

Designed for the VersaHandler TTC with Bobcat pallet forks, this attachment makes it easy to keep loads level on uneven terrain. You can also use it for loading and unloading material from truck beds and placing materials on scaffolding and roofs.
Tilt-Tatch Attachment

Tilt-Tatch Attachment

Get more work out of your Bobcat? attachments with the Bobcat Tilt-Tatch. This revolutionary attachment mounts between the loader and non-hydraulic Bobcat attachments, allowing you to rotate your attachments 15 degrees in either direction.
Tree Fork Attachment

Tree Fork Attachment

With the Tree Fork attachment from Bobcat Company, you will never have to worry about manual labor when transporting trees, rocks, and other odd-shaped objects again. The tree fork attachment is able to carry over 200 pounds of material so you don't have to!
Tree Spade Attachment

Tree Spade Attachment

The rugged, dependable tree spade attachment turns your Bobcat loader into a tree transplanting unit - and lets you speed production and cut labor costs at the same time! The tree spade is simple to operate and easy to maneuver. A tree can be dug, transplanted, or placed in a basket without the operator ever having to leave the Bobcat loader.
Trench Compactor Attachment

Trench Compactor Attachment

Digging is only the first step in most trenching applications. Once the trench has been dug and the cable or water line laid, the Bobcat? trench compactor attachment can help finish the job off.
Trencher Attachment

Trencher Attachment

Tackle tough trenching jobs with Bobcat? trencher attachments, designed and built specifically for Bobcat loaders. That means reliable, cost-effective production as well as Bobcat warranty, parts and service support.
Truss Boom Attachment

Truss Boom Attachment

Speed up construction jobs with this rugged 12-foot boom on VersaHandler telescopic tool carriers designed for picking and placing trusses.
Utility Fork Attachment

Utility Fork Attachment

Use the strong, replaceable teeth on the utility fork to handle a variety of farm and ranch chores. For more versatility and efficiency add the hydraulic grapple to the utility fork, low-profile bucket or construction/industrial bucket to handle loose hay, straw bedding, manure or boulders.
Vibratory Plow Attachment

Vibratory Plow Attachment

Designed for use with Bobcat MT50 and MT52 mini track loaders, the VP12 vibratory plow is the ideal tool for installing flexible pipe and utility cable in the ground. Applications include constructing new sprinkler systems and placing telephone, TV cable and electrical wire.
Vibratory Roller Attachment

Vibratory Roller Attachment

This high-performance, hard-packing attachment lets you compact flatwork, trenches and asphalt patching jobs while moving forward or in reverse. With its offset drum design, you can even compact next to sidewalks, walls or curbs.
Water Kit Attachment

Water Kit Attachment

Keep the dust under control when using Bobcat attachments such as the angle broom, sweeper, planer and vibratory roller. High-capacity water tanks minimize refilling and four Tee Jet nozzles spray the water evenly across the width of the attachment.
Wheel Saw Attachment

Wheel Saw Attachment

Cut through a variety of surfaces with the Bobcat wheel saw attachment. Powered by a high-flow Bobcat loader, wheel saw models WS18 and WS24 cut through asphalt, concrete, frozen ground and wire mesh.
Whisker Push Broom Attachment

Whisker Push Broom Attachment

The Bobcat whisker push broom sweeps material, wet or dry, forward or backward, and effectively cleans along curbs and other tight areas. This handy attachment is 20 to 30 times faster than hand sweeping.